Kasutusjuhend Blaupunkt HSI201BL Triikraud

Kasutusjuhend

5

HSI201

1. Steam intensity switch

2. Spray button

3. Steam burst button

4. Temperature control knob

5. Swivel power cord

6. Pilot light

7. Water tank

8. Soleplate

9. Spray nozzle

10. Cap of filling opening

11. Hand grip

12. Self-cleaning button

13. Measuring cup

BEFORE FIRST USE

Remove all paper, carton and foil protecting the appliance and its parts.

The iron may emit a delicate smoke and smell the first time it is used. It is recommended that the iron

be heated before ironing and that the steam burst button be pressed a few times before first use.

FILLING THE WATER TANK

Make sure the appliance is disconnected from the power source. Set the steam intensity to "no steam".

Open the cap on the filling opening.

Pour a measured amount of water using the measuring cup. Check the fill level of the tank by placing

the iron in a vertical position. Do not exceed the MAX level.

Close the cap.

IRONING

After filling the water tank, connect the iron to a power source. Set the desired temperature and the

steam intensity according to the recommendations.

After ironing, set the steam intensity to 0 and the temperature knob to the minimum position.

SETTING IRONING TEMPERATURE

Set ironing temperature using the temperature control knob, adjusting it to the fabric that is being

ironed. First iron fabrics that require the lowest temperature.

• low temperature - synthetic fabrics, silk

•• average temperature - wool

••• high temperature - cotton

MAX the highest temperature - linen

If you wish to decrease the temperature, wait until the pilot light turns on before continuing to iron.

ADJUSTING STEAM INTENSITY

The amount of steam can be adjusted using the steam intensity switch. Steam ironing is not

recommended at low-temperature settings. Despite the membrane limiting the possibility of dripping

from the iron (the anti-drip function), condensed droplets of water may drip from the soleplate.

LARGER STEAM BURSTS AND SPRAY

To obtain a greater amount of steam, press the steam burst button. It is recommended that the steam

burst function not be used numerous times without a break. The iron will cool down too much and

water may start to drip.

To moisten the fabric, you can use the spray. Press the spray button to spray water onto the fabric from

the nozzle.

Only use the steam burst and spray functions when the water tank is at least ¼ full.

CLEANING AND MAINTENANCE

Never immerse the iron in water. Make sure the iron has cooled down. Wipe the body of the iron with a

slightly damp cloth, then wipe until it is dry. The soleplate should be wiped with a soft cloth.

Hinnang

Lisateavet selle juhendi kohta

Mõistame, et on tore, kui teil on teie Blaupunkt HSI201BL Triikraud jaoks paberjuhend. Juhendi saate alati meie veebisaidilt alla laadida ja ise printida. Kui soovite originaaljuhendit, soovitame võtta ühendust ettevõttega Blaupunkt. Nad võivad anda originaaljuhendi. Kas otsite oma Blaupunkt HSI201BL Triikraud kasutusjuhendit mõnes muus keeles? Valige meie kodulehelt oma eelistatud keel ja otsige mudelinumbrit, et näha, kas see on meil saadaval.

Tehnilised andmed

Kõik Blaupunkt Triikrauad kasutusjuhendid
Veel Triikrauad käsiraamatuid

Korduma kippuvad küsimused Blaupunkt HSI201BL Triikraud kohta

Meie tugimeeskond otsib kasulikku tooteteavet ja vastuseid korduma kippuvatele küsimustele. Kui leiate meie korduma kippuvates küsimustes ebatäpsusi, andke sellest meile teada, kasutades kontaktivormi.

Seotud tooted

Kasutusjuhend

Blaupunkt HSI401 Triikraud

Kasutusjuhend

Blaupunkt SSP701 Triikraud

Kasutusjuhend

Blaupunkt SSB501 Triikraud

Kasutusjuhend

Blaupunkt HSI201RO Triikraud

Kasutusjuhend

Blaupunkt HSI511 Triikraud

Kasutusjuhend

Blaupunkt HSI501 Triikraud

Kasutusjuhend

Blaupunkt HSI201 Triikraud

Kasutusjuhend

Blaupunkt SSB801 Triikraud

Seotud kategooriad