Kasutusjuhend Greenworks CD40CS15 Kettsaag

Kasutusjuhend

1 DESCRIPTION

1.1 PURPOSE

This chainsaw is designed for cutting branches, trunks,

logs and beams of a diameter determined by the cutting

length of the guide bar. It is only designed to cut wood.

It is only to be used in an outdoor, domestic application

by adults.

Do not use the chainsaw for any purpose not listed

above.

This chainsaw is not to be used for professional tree

services. It is not to be used by children or by persons

not wearing adequate personal protective equipment

and clothing.

1.2 OVERVIEW

Figure 1-22

1

Guide bar cover

2

Front handle

guard / chain brake

3

Front handle

4

Lock out button

5

Trigger

6

Oil tank cap

7

Oil indicator

8

Spike bumpers

9

Saw chain

10

Guide bar

11

Wrench

12

Rear handle

13

Chain tension

screw

14

Chain cover

15

Chain cover nuts

16

Bolt for saw chain

tension

17

Sprocket

18

Battery release

button

19

Oil outlet

20

Bar groove

21

Chain drive links

22

Cutter

23

Felling direction

24

Danger zone

25

Escape route

26

Direction of fall

27

Notch

28

Felling back cut

29

Hinge

30

Limb cut

31

Keep work off

ground leave

support limbs until

log is cut

32

Log supported

along the entire

length

33

Cut from top (over

buck) avoid cutting

earth

34

Log supported one

end

35

Under buck

36

Over buck

37

Log supported both

ends

38

Bucking a log

39

Stand on uphill side

when cutting

because log may

roll

2 SAFETY

WARNING

Make sure that you do/obey all safety instructions.

Refer to Safety Manual.

3 INSTALLATION

WARNING

Do not change or make accessories that are not

recommended by the manufacturer.

WARNING

Do not put in the battery pack until you assemble all

the parts.

3.1 UNPACK THE MACHINE

WARNING

Make sure that you correctly assemble the machine

before use.

WARNING

• If the parts have damage, do not use the machine.

• If you do not have all the parts, do not operate the

machine.

• If the parts are damaged or missing, speak to the

service center.

1. Open the package.

2. Read the documentation in the box.

3. Remove all the unassembled parts from the box.

4. Remove the machine from the box.

5. Discard the box and package in compliance with

local regulations.

3.2 ASSEMBLE THE GUIDE BAR AND

THE CHAIN

Figure 1-7.

1. Remove the chain cover nuts with the wrench.

2. Remove the chain cover.

3. Put the chain drive links into the bar groove.

4. Put the chain cutters in the direction of the chain

operation.

5. Put the chain in position and make sure that the

loop is behind the guide bar.

6. Hold the chain and bar.

7. Put the chain loop around the sprocket.

8. Make sure the chain tension pin hole on the guide

bar fits correctly with the bolt.

9. Install the chain cover.

10. Tighten the chain. Refer to

Adjust the chain tension.

11. Tighten the nuts when the chain is well tensioned.

5

English

EN

Hinnang

Lisateavet selle juhendi kohta

Mõistame, et on tore, kui teil on teie Greenworks CD40CS15 Kettsaag jaoks paberjuhend. Juhendi saate alati meie veebisaidilt alla laadida ja ise printida. Kui soovite originaaljuhendit, soovitame võtta ühendust ettevõttega Greenworks. Nad võivad anda originaaljuhendi. Kas otsite oma Greenworks CD40CS15 Kettsaag kasutusjuhendit mõnes muus keeles? Valige meie kodulehelt oma eelistatud keel ja otsige mudelinumbrit, et näha, kas see on meil saadaval.

Tehnilised andmed

Kõik Greenworks Kettsaed kasutusjuhendid
Veel Kettsaed käsiraamatuid

Korduma kippuvad küsimused Greenworks CD40CS15 Kettsaag kohta

Meie tugimeeskond otsib kasulikku tooteteavet ja vastuseid korduma kippuvatele küsimustele. Kui leiate meie korduma kippuvates küsimustes ebatäpsusi, andke sellest meile teada, kasutades kontaktivormi.

Seotud tooted

Kasutusjuhend

Greenworks GD40TCS Kettsaag

Kasutusjuhend

Greenworks GD80CS50 Kettsaag

Kasutusjuhend

Greenworks G40CS30 Kettsaag

Kasutusjuhend

Greenworks GD40CS18 Kettsaag

Kasutusjuhend

Greenworks GD40CS40 Kettsaag

Kasutusjuhend

Greenworks G24CS25 Kettsaag

Kasutusjuhend

Greenworks GD60CS40 Kettsaag

Kasutusjuhend

Stiga CS 48 Li 14 Kettsaag

Seotud kategooriad