Kasutusjuhend Lucide 35700/10/36 Flatt Lamp

Kas vajate oma Lucide 35700/10/36 Flatt Lamp’i jaoks kasutusjuhendit? Allpool saate vaadata ja tasuta alla laadida eestikeelset PDF-juhendit. Sellel tootel on praegu 7 korduma kippuvaid küsimusi, 0 kommentaare ja sellel on 0 hääli. Kui see pole teie soovitud juhend, võtke meiega ühendust.

Kas teie toode on defektne ja kasutusjuhendist pole abi? Tasuta remonditeenused: Repair Café.

Kasutusjuhend

Loading…

Safety Instructions
Please read this notice carefully and keep it all along the use of this product. Follow the instructions for a safe and correct
installation and functioning of the fitting. The manufacturer does not accept any responsibility for damage caused by improper
installation and service. Installation should always be done by qualified electrician.
Always isolate the power before commencing installation, maintenance or repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation,
please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or
inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is
damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or another qualified electrician. This is to avoid
all risks.
Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the
correct bulb (respect type and maximal wattage as indicated on the product).
Installation of items in bathroom:
Since each country has its own regulations, please check
them with qualified people, before installing lighting products
in the bathroom.
Below we will explain general requirements.
Zone 0: At least IPX7, and a voltage level according to SELV
is allowed in this zone. SELV means “security extra low
voltage”. In general this means maximum 12V. We
recommend that the lights are installed by a qualified
electrician in this zone.
Zone 1: At least IPX4, Only lighting fixtures with an IP of
minimum IPX4 and a voltage level according to SELV is
allowed in this zone. We recommend that the lights are
installed by a qualified electrician in this zone.
Zone 2: At least IP44. If items are not low voltage, then they
need to be installed at a height of at least 1.6m.
Zone 3: This zone includes all the space which is not mentioned in the 3 other zones (0, 1 and 2). As long as the water can not spat
on the lighting or steam can not get fixated on the light, then an IP21 is ok.
Specific remarks:
If the bottom of the basin for bath or shower is higher than 15cm from the ground, then the heights need to be calculated from the
bottom of the basin.
If there is no basin then the height for zone 0 is 10cm.
In the Netherlands the height of 225cm for zones 1 and 2 is replaced by 260cm.
Symbol Explanation of the symbols which can appear on the fixture
This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits
that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be collected for reuse and
recycling. Electrical and electronic equipment marked with this symbol indicating separate
collection of such equipment must be returned to a municipal waste collection point.
Please respect the minimum distance from the bulb to inflammable objects.
Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to
the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III: The item is only suitable for lower voltage supply and must not be connected to the earth
wire.
If the protection glass is damaged or broken, it needs to be replaced immediately.
Eestikeelne juhendi allalaadimine (PDF, 0.42 MB)
(Mõelge keskkonna peale ja printige see kasutusjuhend välja ainult siis, kui see on tõesti vajalik)

Loading…

Hinnang

Andke meile teada, mida arvate tootest Lucide 35700/10/36 Flatt Lamp, jättes selle kohta hinnangu. Kas soovite jagada oma kogemusi selle tootega või esitada küsimuse? Jätke kommentaar lehe alumises servas.
Kas olete teenusega Lucide 35700/10/36 Flatt Lamp rahul?
Jah Nr
Olge esimene, kes seda toodet hindab
0 häält

Liituge selle toote teemalise vestlusega

Siin saate jagada, mida arvate Lucide 35700/10/36 Flatt Lamp kohta. Kui teil on küsimusi, lugege esmalt hoolikalt kasutusjuhendit. Kasutusjuhendit saab taotleda kasutades meie kontaktivormi.

Lisateavet selle juhendi kohta

Mõistame, et on tore, kui teil on teie Lucide 35700/10/36 Flatt Lamp jaoks paberjuhend. Juhendi saate alati meie veebisaidilt alla laadida ja ise printida. Kui soovite originaaljuhendit, soovitame võtta ühendust ettevõttega Lucide. Nad võivad anda originaaljuhendi. Kas otsite oma Lucide 35700/10/36 Flatt Lamp kasutusjuhendit mõnes muus keeles? Valige meie kodulehelt oma eelistatud keel ja otsige mudelinumbrit, et näha, kas see on meil saadaval.

Tehnilised andmed

Kaubamärk Lucide
Mudel 35700/10/36 Flatt
Kategooria Lambid
Faili tüüp PDF
Faili suurus 0.42 MB

Kõik Lucide Lambid kasutusjuhendid
Veel Lambid käsiraamatuid

Korduma kippuvad küsimused Lucide 35700/10/36 Flatt Lamp kohta

Meie tugimeeskond otsib kasulikku tooteteavet ja vastuseid korduma kippuvatele küsimustele. Kui leiate meie korduma kippuvates küsimustes ebatäpsusi, andke sellest meile teada, kasutades kontaktivormi.

Kas kõik LED -valgustid on hämardatavad? Kontrollitud

Ei, mitte kõik LED -tuled ei ole hämardatavad. See on märgitud pakendile või valgusele ise.

Sellest oli abi (492) Loe rohkem

Panin lampi uue tule, kuid see ei sütti, miks see nii on? Kontrollitud

Mõned lambid on ette nähtud teatud võimsusega valgusallikate jaoks. Kui sisestatakse valgusallikas, mis vajab suuremat võimsust, kui lamp suudab pakkuda, ei pruugi valgus sisse lülituda. Kui lamp annab palju suuremat võimsust kui valgusallikas, võib valgusallikas läbi põleda.

Sellest oli abi (347) Loe rohkem

Miks on valguse värv oluline? Kontrollitud

Üldiselt on kahte tüüpi valgust, sooja valgust ja külma valgust. Külm valgus hoiab sind terava ja ärkvel. Soe valgus mõjub lõõgastavalt. Valguse soojust mõõdetakse kelvinites ja see on märgitud lambi enda pakendile.

Sellest oli abi (283) Loe rohkem

Mis on luumen? Kontrollitud

Luumen on allikas kiirgava nähtava valguse koguhulga mõõtühik.

Sellest oli abi (228) Loe rohkem

Millised kruvialused on olemas? Kontrollitud

Kogu maailmas on palju pistikupesasid, kuid enamasti kasutatakse neid, mis põhinevad Edisoni kruvil, mis on tähistatud tähega E. Enamikus riikides on kruvialused E27 ja E14 standardsed. Ameerika Ühendriikides on standardid E26, E17, E12 ja E10.

Sellest oli abi (171) Loe rohkem

Mida vatt minu lambi kohta ütleb? Kontrollitud

Vatt on elektritarbimise mõõtühik. Lambid, mis toodavad rohkem valgust, tarbivad tavaliselt rohkem vatti, kuid valgustugevuse võrdlemiseks peaksite alati kasutama luumenit.

Sellest oli abi (147) Loe rohkem

Mis on LED? Kontrollitud

LED tähistab valgusdioodi. Juhtides võimsust pooljuhti õiges suunas, kiirgab valgust.

Sellest oli abi (127) Loe rohkem
Kasutusjuhend Lucide 35700/10/36 Flatt Lamp

Seotud tooted

Seotud kategooriad